The Interchangeability of Ford 4-Speed Shifters From 1962 to 1973

The Interchangeability of Ford 4-Speed Shifters From 1962 to 1973

There is no these types of factor as a Ford Mustang, Fairlane, Galaxie 4-velocity shifter. even though, the change handles will interchange for the most part, they will only be right for their specified application. There are around 30 particular person handles used throughout the interval. All Handles with a reverse lock out up to January 2, 1968 had a 1′ 7/8 bolt spacing following that their was a 2 “bolt…Saddles can be modified to accommodate switching handles close to from 1 product or year to yet another.

Exceptions to the interchangeability rule incorporate the Galaxie Top rated Loader linkage from 1964-65 it will also fit the Fairlane and Tiger major loader for the very same 12 months, also the T10 Galaxie linkage will also suit a T10 Fairlane transmissions. This is the scenario even even though the Fairlane transmission is 2″ shorter.

In 1969 Ford changed the 4-velocity shifters to do away with the cable lock out. The lock out function was designed into the shifter handle system by itself. This feature was a brittle stamped steel piece, It commonly broke at about 65, 000 miles relying on use also the key spring experienced the very same breakage difficulty. Though the control mechanisms were being in essence the exact same concerning Mustang, Torino and Galaxie the linkages have been diverse and the shift handles were being unique. Only the Mustang Large Block use an adapter plate and this device was use only for 1 yr.

Ford went to the Hurst shifter in 1970 and was use by Mustang/Cougar and Torino/Cyclone only, even though the 1970 adapter plate. experienced a Large Ford section range they by no means place a 4 pace in a Galaxie. that plate was used for Torino/Cyclone only and for the Mustang three distinct adapter plates have been used they were the Major Block, Little Block and Manager 429. The Hurst Handles in 1970-71 have been flat and 1972-73 were being round both experienced Hurst emboss on them and in every situation the Torino/Cyclone handles were lengthier than the Mustang, but the spherical handles in1972-1973 have been only a little bit more time.

The housing in 1970 Hurst shifter handle mechanism were being cad plated and in 1971-1973 were being black oxide. 1972-73 Torino/Cyclone regulate mechanisms have been distinct then the 1970-71 and utilised a stamped steel adapter plate and their ended up no part figures on the plate.

In conclusion when it arrives to Ford 4-pace shifters you can under no circumstances say in no way and you can never say normally, their is on these thing as a mix shifter throughout that era. If you are restoring just one of these versions and will need shifters pieces be conscious of these variances it can help save you time and funds. Know your resource and the place you get your Ford 4-speed shifter components so your project goes effortlessly.